Gasketing

20539

59ml Indian Head Gasket
Shellac Compound

The original quality formula. Hard setting, economical sealant. Seals all common gasketing materials in low temperature and low pressure applications. Temperature range -54˚C to 177˚C; resists diesel fuels and most shop fluids.
Suggested Applications:
Hose connections, paper and cardboard gaskets.

22071

14g Water Pump & Thermostat RTV Silicone Gasket

A noncorrosive, sensor-safe RTV silicone gasket material formulated specifically for water pumps and thermostat housings. Highest water-glycol resistance available in an RTV silicone.
Suggested Applications:
Water pump and thermostat housings.

80017

473ml Aviation Form-a-Gasket No.3 Sealant Liquid

Slow-drying, non-hardening brush-top sealant approved for use in aviation as well as automotive
applications. Temperature range -54°C to 204°C; resists gasoline, oil and grease.
Suggested Applications:
Close fitting machined surfaces, sealing hoses and solid gaskets.

80062

118ml High Tack Gasket Sealant and
Spray-a-Gasket Sealant

Fast-drying all-purpose sealant dries to a highly tacky, non-brittle film. A reliable general adhesive. Remains effective at temperatures of -54°C to 260°C. Resists gasoline, oil, antifreeze, axle lube, kerosene, propane and butane.
Suggested Applications:
Valve covers, fuel pumps, carburettors, manifold gaskets; Spray-A-Gasket seals all felt, cork, metal, paper and rubber.

80645

113g Gasket Remover - Low VOC Formula

This low VOC formulation combines powerful gasket remover strength with an innovative delivery system. Its fast-foaming action penetrates the most stubborn or baked-on gaskets in 15-20 minutes. The built-in brush-tip was designed for easy application and allows for scrubbing on intricate surfaces. This product is NOT recommended for use on silicone gaskets.
Suggested Applications:
Removes solvent based gasketing, anaerobic gasketing and gasket sealant products including all Permatex Form-A-Gasket, Spray-A-Gasket, Indian head, High Tack, Gasket Sealants and Dressings, baked-on gaskets and cements, and formed-in place gaskets.

85249

35ml Hylomar Universal Blue Racing Formula Gasket Dressing & Flange Sealant

This non-chlorinated gasketing and sealing compound has been specially formulated to be non-setting and non-hardening at elevated temperatures. It withstands rapid changes in temperature and remains flexible and tacky even at high temperatues, allowing repeated disassembly and reassembly in high performance applications.
Suggested Applications:
Thermostat housings, differential coverings, hydraulic drives and motors, gearbox assemblies, intake manifold assemblies, oil, fuel and water pump housings and seals, fuel injectors, fuel pumps, transmission and torque converter seals.

82180

95g Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker

For dealership warranty requirements, Ultra Black ensures extended drivetrain warranty compliance. Fast-curing formula. Sensor safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistant properties through use of a patented adhesion system. Temperature range -54˚C to 260˚C intermittent; resists auto and shop fluids and vibration.
Suggested Applications:
Valve covers, oil pans, intake manifold end seals, timing covers and differential covers.

81724

95g Ultra Blue Multi-Purpose RTV Silicone Gasket Maker

Permatex Ultra silicones were developed to meet today’s technology changes. Sensor-safe, low odor, noncorrosive. Outstanding oil resistance and joint movement tolerance. Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones. Temperature range -54˚C to 260˚C intermittent; resists auto and shop fluids and vibration.
Suggested Applications:
Valve covers, oil pans, timing covers and differential covers.

82194 (Superceeds to 89145)

99g Ultra Grey Rigid High Torque Silcone Gasket Maker

Designed specially for high torque and high vibration applications like those common in import engines. This premium RTV gasket maker exceeds manufacturers’ performance requirements. Noncorrosive and low odor. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Guaranteed not to leak. Temperature range -54˚C to 260˚C intermittent.
Suggested Applications:
Valve covers, oil pans, transmission pans, intake manifold end seals, timing covers, water pumps and thermostat housings.

81878

85g Ultra Copper Max Temperature RTV Silicone Gasket Maker

For high operating temperatures common in 4-cylinder, turbocharged or high performance engines. The most advanced, high temp RTV silicone gasket available. Sensor safe, low odor, non corrosive. Superior adhesion. Three times more oil resistant than conventional silicones; eight times more flexible than cut gaskets. Temperature range -54˚C to 371˚C intermittent; resists auto and shop fluids and vibration.
Suggested Applications:
Exhaust manifolds/headers, valve covers, oil pans, timing covers, water pumps and thermostat housings.

80088

207ml High Temp
Form-a-Gasket Sealant

Slow setting, non-hardening, high temperature sealant. Especially recommended for heavy-duty applications. Temperature range -54˚C to 315˚C intermittent. Resists common shop fluids.
Suggested Applications:
Coating and sealing exhaust gaskets, flanges and connections as well as other heavy duty applications.

51813

50ml Anaerobic
Gasker Maker

Noncorrosive gasketing material designed primarily for use on aluminum, iron, and steel flanged mating surfaces. Ideal for on the spot and emergency repairs, or when a conventional gasket is unavailable. Fills gaps up to .015” and cures to a solvent-resistant seal that will not tear or decay during service. Parts disassemble easily even after extended service and old gasket material can be removed in minutes with a simple putty knife.
Suggested Applications:
Water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings and o-ring replacement.

25224

198g The Right Stuff
- Gasket Maker

Return equipment to service immediately and make leak-proof gaskets in just one minute. This latest elastomeric rubber gasket technology is blowout resistant and outperforms pre-cut gaskets. Specified on production
lines by GM, Ford, Chrysler and Mercedes-Benz.Temperature range -59˚C to 232˚C continuous, 260˚C intermittent, resists ATF, coolant, oil and other shop fluids. Protects against leaks caused by vibration and thermal expansion. Sensor-safe.
Suggested Applications:
Automotive and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat
housings and water pumps.

80016

85g Form-a-Gasket
No. 2 Sealant

Slow-drying, non-hardening sealant designed for sealing cut gaskets and stamped parts. Allows for easy disassembly if required. Temperature range -54˚C to 204˚C; resists common shop fluids and fuels. Use where sealing is more important than adhesion.
Suggested Applications:
Valve cover gaskets and oil pan gaskets.

80057

118ml Super “300” Form-a-Gasket Sealant

Non-hardening sealant designed to resist heat transfer fluids such as oil or antifreeze. Temperature range -54˚C to 204˚C. Resists anti-freeze, aviation fuels, high-detergent oils and lubricants.
Suggested Applications:
Valve cover gaskets, compressors and diesel engine heads.

80697

255g Copper Spray-a-Gasket
Hi Temp Sealant

Fast-drying, metallic copper sealant helps dissipate heat, prevents gasket burnout and improves heat transfer. Fills minor surface irregularities. Seals instantly. Fills hot spots and surface imperfections. Temperature range -45˚C to 260˚C; resists all types of automotive fluids, especially gasoline.
Suggested Applications:
Cylinder head gaskets, carburettor gaskets, exhaust manifold gaskets and other high temperature applications.